Warning light diagnosis · Birmingham

Engine Management & Warning Light Diagnosis in Birmingham

A warning light is the car telling you a system has spotted a problem. It doesn’t tell you which part has failed. We come to your home or workplace, read every module, test the parts the codes point to and tell you what’s actually wrong.

  • Engine, ABS, airbag, DPF, power steering and more
  • Every module scanned, not just the engine
  • Cause confirmed before parts are fitted
  • Light cleared and re-checked after the repair

Steady, flashing or red: what the light is telling you

The colour and behaviour of the light matter more than the symbol. As a rule of thumb:

  • Steady amber: a fault has been logged, often emissions-related. The AA says you should usually be able to finish your journey, but get it checked as soon as you can.
  • Flashing amber engine light: usually a misfire bad enough to damage the catalytic converter. Ease off, avoid hard acceleration and get it looked at straight away.
  • Red light, or any light with a loss of power, smoke, strange noises or rising temperature: stop when it’s safe and get help. Don’t drive on.

Not sure which you’re looking at? Send us a photo of the dashboard on WhatsApp with your reg and we’ll take it from there.

Warning lights we diagnose

  • Engine management light (also called the check engine light): misfires, sensor faults, air leaks, fuelling, EGR and emissions faults.
  • Flashing glow plug light on a diesel: on many diesels this doubles as a general engine fault warning, not just a glow plug problem.
  • DPF light: the diesel particulate filter is loading up with soot. See DPF cleaning and regeneration.
  • ABS, traction and stability control lights: wheel speed sensors, wiring, the ABS module or low system voltage.
  • Airbag (SRS) light: seat connectors, the steering wheel clockspring, seat belt pretensioners or stored crash data.
  • Battery or charging light: usually the charging system rather than the battery. See electrical fault finding.
  • Power steering light: electric power steering faults, sensors or low voltage.
  • Tyre pressure light: low pressure, or a faulty tyre pressure sensor.

Red oil pressure or coolant temperature light? Stop the engine as soon as it’s safe. Carrying on can cause serious engine damage.

Why clearing the code isn’t a repair

Any cheap code reader can switch a warning light off. If the fault is still there, the light comes back: sometimes within minutes, sometimes after a few drives. Clearing codes also wipes the freeze-frame data that helps track down intermittent faults, so please don’t clear them before we arrive.

It matters for the MOT too. Since May 2018, an engine management light that’s on, or doesn’t work, has been a major defect on most cars, which means an automatic fail. ABS, airbag and power steering warning lights can fail a car too. Our MOT warning lights guide has the full list from the official manual.

What happens on the visit

  1. We scan every module our equipment can reach and record the codes and freeze-frame data.
  2. We look at live data to see what the sensors are reporting right now.
  3. We test the components and wiring the codes point to, so the cause is confirmed, not assumed.
  4. You get a plain-English explanation and a repair quote. Most repairs we can do there and then.
  5. After the repair we clear the codes and check the light stays off.

Questions We Get Asked

Can I drive with the engine management light on?

If it’s steady amber and the car drives normally, usually yes, carefully and not for long. If it’s flashing or red, or the car has lost power, stop when it’s safe and get help.

Will a warning light fail my MOT?

Many will. An engine management light that’s on is a major defect on petrol cars first used from 1 July 2003 and diesels from 1 July 2008, and ABS, airbag and power steering faults can fail a car too. See our MOT warning lights guide.

Can you just turn the light off?

We can clear the codes, but if the fault is still there the light will come back. We find and fix the cause first, then clear the codes and check the light stays off.

Should I clear the codes before you arrive?

No, please don’t. The stored codes and freeze-frame data help us find the fault faster, especially if it comes and goes.