Diagnostics

What Does a Car Diagnostic Check Actually Show?

A diagnostic check connects to your car’s computers and reads what they’ve recorded. It can show a lot, but a scan on its own rarely tells you exactly which part has failed. Here’s what a check covers, and where its limits are.

What a diagnostic scan reads

Modern cars have many control modules, each looking after a system: engine, gearbox, ABS, airbags, body electrics and more. A diagnostic tool plugs into the car’s diagnostic socket, usually under the dashboard, and talks to them. Depending on the tool and the car, a check can show:

  • Fault codes stored when a module spots a problem, including pending codes for faults that haven’t yet turned a light on
  • Freeze-frame data: a snapshot of engine speed, temperature, load and other readings at the moment a fault was logged
  • Live data: what the sensors are reporting right now, such as temperatures, pressures, fuel trims and voltages
  • Readiness monitors: whether the car’s emissions self-tests have completed since the codes were last cleared
  • Output tests: commands that make parts such as fans, injectors or valves operate so they can be checked

Cheap code readers versus dealer-level equipment

Petrol cars sold new in the UK from 2001, and diesels from around 2004, have a standard engine diagnostic system known as EOBD. A basic code reader can read the generic engine codes it stores, and that’s often all it can read.

Gearbox, ABS, airbag, body and comfort modules frequently use manufacturer-specific codes and data that basic readers can’t see. Dealer-level equipment can reach far more of them, show live data and run tests. On a car with several faults, that’s the difference between seeing one code and seeing the whole picture.

How to read a fault code

Codes follow a standard pattern. Take P0171:

  • The letter shows the system: P for powertrain (engine and gearbox), B for body, C for chassis, and U for the network that connects the modules.
  • The first number shows whose code it is: 0 means a generic code shared by all makes, and 1 usually means one set by the manufacturer.
  • The rest identifies the fault. P0171 means the engine is running lean on bank 1: more air, or less fuel, than it expects.

Our guide to common engine fault codes covers five well-known codes in more detail.

What a scan can’t tell you

  • Which part to replace. A code points to a system or a circuit. The cause could be the sensor, its wiring, a connector, or something else that’s making the sensor read wrong.
  • The condition of mechanical parts that don’t have sensors, such as most suspension and steering components.
  • Problems that haven’t happened yet. A clean scan means nothing has been logged, not that nothing will fail.
  • History that’s been cleared. Clearing codes wipes them, although incomplete readiness monitors can be a clue that someone has done it recently.

What a proper diagnostic visit adds

The scan is where a diagnosis starts. After reading the codes we look at live data, then test the components and wiring the codes point to, so the cause is confirmed before anything is replaced. Once the repair is done, we clear the codes and check the fault doesn’t come back.